Advantech RS-485 user manual Syntax $aaSiCjAhEscr

	5013/5017/5017H/5018
Command Set	Analog Input Alarm
$aaSiCjAhEs	$aaSiCjAhEs

Name	Enable/Disable Alarm
Description	Enables/Disables the High/Low alarm of the specified
	input channel in the addressed ADAM-5000 system
Syntax	$aaSiCjAhEs(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	SiCj identifies the desired slot i (i : 0 to 3) and the
	desired channel j (j : 0 to 7).
	AhEs is the Set Alarm Mode command.
	h indicates alarm type and can have the value H = High
	alarm, L = Low alarm
	s indicates alarm enable/disable and can have the value
	E = Enable, D = Disable
	(cr) represents terminating character, carriage return
	(0Dh)
Response	!aa(cr) if the command was valid
	There is no response if the system detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	aa represents the 2-character hexadecimal address of the
	corresponding ADAM-5000 system.
	(cr) represents terminating character, carriage return
	(0Dh)

6-76 ADAM-5000