Advantech RS-485 user manual Syntax $aaSiCj5cr

	Chapter 6
$aaSiCj5	$aaSiCj5
Name	Read counter Start/Stop
Description	Requests the addressed counter/frequency module to
	indicate whether counters are active.
Syntax	$aaSiCj5(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system.
	SiCj identifies the I/O slot i and the channel j of the
	module you want to set.
	5 is the command for reading counter Start/Stop.
	(cr) is the terminating character, carriage return (0Dh)
Response	!aas(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.
	There is no response if the module detects a syntax error
	or communication error or if the specified address does
	not exists.
	! delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was
	invalid.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	s represents start/stop command.
	s=0 indicate stop counter.
	s=1 indicate start counter.
	(cr) is the terminating character, carriage return (0Dh)

ADAM-5000 6-137