Advantech RS-485 user manual Load Module’s Configuration File

Chapter 5

and then specify the file name.

The configuration file is now saved.

5.4.8Load Module’s Configuration File

∙Reload previous settings. Sets the input range, baud rate, data format, checksum status and/or integration time and alarm status for a specified analog input module.

∙Sets the output range, baud rate, data format, checksum status and slew rate for a specified analog output module.

∙Sets the baud rate and checksum status for a digital I/O module.

∙Sets the input mode, baud rate, checksum status and/or frequency gate time, input signal mode, gate mode, alarm status, etc. for a specified counter/frequency module.

Note:	Baud rate and checksum can only be changed in the
	INIT* state. Changed settings can only take effect
	after a module is rebooted.

ADAM-5000 5-19