Advantech RS-485 Syntax #aaSiBBdatacr, When writing to all channels byte 2 or 4-characters

	5050/5051/5052/5056/
Command Set	5060/5068 Digital I/O
#aaSiBB(data)	#aaSiBB(data)

Name	Digital Data Out
Description	This command either sets a single digital output channel
	or sets all digital output channels simultaneously.
Syntax	#aaSiBB(data)(cr)
	# is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system.
	Si identifies the slot i (i:0 to 3) of the ADAM-5000
	system which contains the module whose output values
	you want to set.
	BB is used to indicate which channel(s) either single or
	all will be set.
	Writing to all channels (write a byte): both characters
	should be equal to zero (BB=00).
	Writing to a single channel (write a bit): first character is
	1, second character indicates channel number which can
	range from 0h to Fh. The ADAM-5056 can range from
	0h to Fh, and the ADAM-5060/5068 can range from 0h to
	7h).
	(data) is the hexadecimal representation of the digital
	output value(s).
	When writing to a single channel (bit) the first character
	is always 0. The value of the second character is either 0
	or 1.
	When writing to all channels (byte) 2 or 4-characters
	are significant. The digital equivalent of these
	hexadecimal characters represent the channels' values.
	Note that the number of channels on the ADAM-5056
	and ADAM-5060/5068 differ.

6-110 ADAM-5000