Manuals / Marantz / Computer Equipment / Computer Monitor

Marantz PD4293D WIDE Operations, Watching with a wide screen manual, ZOOM size screen

Models: PD4293D

1 64

Download 64 pages 52.58 Kb

Page 21

WIDE Operations

WIDE Operations

Watching with a wide screen (manual)

With this function, you can select one of four screen sizes.

When watching videos or digital video discs

1.Press the WIDE button on the remote control.

2.Within 3 seconds ...

Press the WIDE button again.

The screen size switches as follows:

→ ZOOM → NORMAL → FULL → STADIUM

STADIUM size screen

The picture is expanded in the horizontal and vertical directions at different ratios.

*Use this for watching normal video programs (4:3) with a wide screen.

ZOOM size screen

The picture is expanded in the horizontal and vertical direction, maintaining the original proportions.

* Use this for theater size (wide) movies, etc.

NORMAL size screen (4:3)

The normal size screen is displayed.

*The picture has the same size as video pictures with a 4 : 3 aspect ratio.

FULL size screen

The image is expanded in the horizontal direction.

*Images compressed in the horizontal direction (“squeezed images”) are expanded in the horizontal direction and displayed on the entire screen. (Normal images are expanded in the horizontal direction.)

When watching high definition video source

1. Press the WIDE button on the remote control.

FULL size screen (16 : 9)

The full size screen is displayed.

* The picture has the same size as video pictures (16 : 9).

14

Image 21

Marantz PD4293D WIDE Operations, Watching with a wide screen manual, When watching videos or digital video discs

Contents

Model PD4293D User Guide Plasma MonitorPrecautions Warnings and Safety PrecautionImportant Information Use the band to fasten the ferrite core supplied to the DVI cable DOC avis de conformation PrécautionsMises en garde et précautions de sécurité AVERTISSEMENTREMARQUE What is excluded? What is covered?Before requesting service To get warranty serviceOSM Controls Contentsunit. Wall mount unit, Stand, etc. * See page Ventilation Requirements for enclosure mountingDrawing A Drawing B How to Attach Options to the Plasma MonitorContents of the Package The features you’ll enjoy includeIntroduction Introduction to the Plasma Monitore POWER/STANDBY indicator q Powery VOLUME DOWN and UP Part Names and FunctionA AC IN Rear View/ Terminal BoardB EXT SPEAKER L and R D VIDEO1q POWER ON/OFF Switches Power ON/OFF Remote Control0VOLUME + w RGB/PC4OFF TIMER Battery Installation and Replacement5Remote control signal transmitter 2WIDEOperating Range Handling the remote controlPersonal computer with a digital RGB output InstallationIBM VGA or Compatibles Macintosh or CompatiblesConnecting Your VCR or Laser Disc Player Connecting Your Document CameraConnecting Your DVD Player Connections with Equipment that has a Digital InterfaceRIGHT External Speaker ConnectionsLEFT AUDIOPin Configuration and Signal of the RGB 3 IN Connector DVI Connector Pin Assignments and Signal Levels for 15 pin RGB AnalogSignal Analog Signal DigitalVOLUME POWERTo adjust the volume To cancel the soundTo set the off timer OFF TIMERTo cancel the off timer After the power is turned off with the off timerWhen watching high definition video source When watching videos or digital video discsWIDE Operations Watching with a wide screen manualWatching computer images with a wide screen Supported resolutionInformation 2. Within 3 secondsMenu Operations Note The main menu disappears by pressing the EXIT buttonOSMOn Screen Menu Controls 3 AUDIO1 VIDEO1 AUDIO2 HD/DVD1 AUDIO3 RGB1 1 RGB/PC only 2 PLE AUTO ORBITER OFF INVERSE OFF SCREEN WIPER OFFAUTO AUTO1Adjusting the picture Picture Settings MenuPress the PROCEED button on the remote control to 4. Once the adjustment is completed3. To set to “THEATER” Setting the picture mode according to the brightness of the room Types of picture modes Press the PROCEED button on the remote control to4. Once the setting is completed Setting the color temperature Setting the color temperature Press the PROCEED button on the remote control to7. Once the adjustment is completed Adjusting the color to the desired quality Adjusting the white balance Press the PROCEED button on the remote control to NR Reducing noise in the picture Types of noise reduction Press the PROCEED button on the remote control toAdjusting the treble, bass and left/right balance Sound Settings Menu2. To adjust the bass To continue adjusting the soundAdjusting the Position, Size, Fine Picture, Picture Adj Screen Settings MenuTo select a mode 2. To adjust the vertical positionSetting the on-screen menu Function Settings MenuExample Turning the on-screen menu mode off Adjusting the Auto Picture3. To adjust the position Adjusting the position of the menu displayAdjusting the position of the menu display Press the PROCEED button on the remote control to3. To turn the power management function on Setting the power management for computer imagesPower management function Power management settingsPOWER/STANDBY indicator DescriptionTurning the picture back on 3. To adjust the “GRAY LEVEL” Setting the picture to suit the movie3. To set the CINEMA MODE to “OFF” CINEMA MODEWhen you adjust the RGB3 ADJ Setting RGB3 ADJReducing burn-in of the screen display MAIN MENU on the screen, then5. Once the setting is completed Setting the time for “INVERSE”ORBITER INVERSE6. Once the setting is completed Setting the time for “SCREEN WIPER”Setting the time To select “ON” for the “WORKING TIME”To select “ON” for “WORKING TIME” Resetting to the default values6. Once the setting is completed Setting the timeSetting the allocation of the audio connectors Options Settings Menu3. To set the AUDIO1 to “VIDEO2” COMPSetting a computer image to the correct RGB select screen Setting the BNC connectors3. To set the BNC SELECT mode to “COMP.” 3. To set the RGB select mode to “MOTION”See page 52 for the details of the above settings Setting high definition images to the suitable screen size3. To set the HD SELECT mode to “1035I” RGB SELECT modesSetting the language for the menus Checking the frequencies, polarities of input signals, and resolutionLanguage settings Information MenuVideo signal formats Setting the video signal format3. To select “3.58 NTSC” Press the PROCEED button on the remote control toCommand Type of connector D-Sub 9-pin maleCheck Sum CKS, Error Processing, and ACK External Control01. Power ON Command Reference List02. Power OFF 03. Input Switch Change05. AUDIO Mute On 04. VOLUME Gain Data06. AUDIO Mute Off 07. CONTRAST Gain Data10. COLOR Gain Data 12. PICTURE MODE Select13. COLOR TEMP SELECT 11.TINT Gain Data15. GREEN Gain Data 17. NR MODE Set18. BASS Gain Data 16. BLUE Gain Data20. BALANCE Gain Data 21. SCREEN MODE Select23. H. POSITION Gain Data 24. V-HEIGHT Gain Data26. AUTO PICTURE Select 27. PHASE Gain Data28. CLOCK Gain Data 29. OSM Select33. CINEMA MODE Set 31. POWER MGT Select30. OSM ADJ. Gain Data 32. GRAY LEVEL Set36. INVERSE Set 38. RESET37. SCREEN WIPER Set 39. Audio Select Set41. RGB Select 40. BNC SELECT42. HD Select 43. LANGUAGE Select46. Input MODE Request 45. FREQUENCY RequestHorizontal sync polarity 03H PRO 47. VIDEO ADJ Request48. Audio Select Request 49. Failure Mode Request50. MODEL NAME Request HD HD1 or DTV or DTVTable of Signals Supported Supported resolutionComputer input signals supported by this system With digital input some signals are not accepted If you are connecting a composite sync signal, use the HD terminal7 Other screen modes ZOOM and STADIUM are available as well Symptom TroubleshootingChecks Remedy1 HD/DVD/DTV input signals supported on this system Specifications2 The 5-BNC connectors are used as RGB/PC2, HD DVD2 and VIDEO3 input. Select one of them under “BNC SELECT”Page Printed in Japan R is a registered trademark09/2001 MITar