Manuals / Marantz / Computer Equipment / Computer Monitor

Marantz PD4293D manual Specifications, 1 HD/DVD/DTV input signals supported on this system

Models: PD4293D

1 64

Download 64 pages 52.58 Kb

Page 62

Specifications

Specifications

Product Name			SLIM SERIES Plasma Monitor
Product Code			PD4293D
Screen Size			36.3"(H)×20.4"(V) inches
			921(H)×518(V) mm
			diagonal 42"

Aspect Ratio			16 : 9
Resolution			853(H)×480(V) pixels
Pixel Pitch			0.04"(H)×0.04"(V) inches
			1.08(H)×1.08(V) mm

Color Reproduction			256 levels, 16,770,000 colors
Signals
	Synchronization Range		Horizontal : 15.5 to 93.8 kHz
			(automatic : step scan)
			Vertical : 50.0 to 120 Hz
			(automatic : step scan)

		Input Signals	RGB, NTSC (3.58/4.43), PAL (B,G,M,N),
			PAL60, SECAM, HD1 , DVD1 , DTV*1
Input Terminals
	RGB
		Visual 1 (Analog)	mini D-sub 15-pin×1
		Visual 2 (Analog)	BNC (R, G, B, H/CS, V)×1*2
		Visual 3 (Digital)	DVI-I 29-pin×1*3
			(Not compatible with analog input)

		Video
		Visual 1	RCA-pin×1
		Visual 2	S-Video: DIN 4-pin×1
		Visual 3	BNC (G/Y/VIDEO3)×1*2
		DVD/HD/DTV
		Visual 1	RCA-pin (Y, PB[CB], PR[CR])×1*1
		Visual 2	BNC (Y, PB[CB], PR[CR])×11, 2
		Audio	Stereo RCA×3(selectable)
	External Control		D-sub 9-pin×1(RS-232C)
Sound output			7W+7W at 6 ohm
Power Supply			AC120V 50/60Hz
Current Rating			3.9A (maximum)
Power Consumption			280W (typical)
Dimensions			41.3 (W)×25.5 (H)×3.5 (D) inches
			1048 (W)×648 (H)×89(D) mm

Weight			61.8 lbs / 28.5 kg
Environmental Considerations
	Operating Temperature		0°C to 40°C / 32°F to 104°F
		Humidity	20 to 80% (no condensation)
	Storage Temperature		-10°C to 50°C / 14°F to 122°F
		Humidity	10 to 90% (no condensation)

Front Panel User Controls			Power on/off, Input source select,
			Volume up/down, OSM control

Remote Control Functions			Power on/off, Input source select, OSM
			control,Volume up/down, Cursor (UP,
			DOWN,LEFT, RIGHT), Pointer, Zoom up/
			down, Off timer, Wireless/ Wired remote
			control

OSM Functions			Picture (Contrast / Brightness / Sharpness/
			Color / Tint / Picture mode / Color
			temperature/ Noise reductions), Sound (Bass
			/ Treble/ Balance),Screen (V-Position / H-
			Position/ V-Height / H-Width /Auto Picture
			/ Fine picture/ Picture adjustment), Function
			(OSM/ OSM adjustment/ Power
			management/ Gray level/ Cinema mode/
			RGB3 Adjustment, Long Life (PLE, Orbiter,
			Inverse, White, Screen Wiper)/ Reset)/Option
			(Audio input/ BNC select/ RGBselect/ HD
			select), Information (Frequency / Language*
			/ Color system)
			*English, German, French, Italian, Spanish,
			Swedish, Japanese

	1.18"	2.32"
41.3" (1048)	(30)	2.32"
		(59)
36.3" (921)
20.4" (518)	25.5" (648)
		3.5"
		(89)
	Units are in inch
		(mm)

The features and specifications may be subject to change without notice.

*1 HD/DVD/DTV input signals supported on this system

480P (60 Hz)	480I (60 Hz)
525P (60 Hz)	525I (60 Hz)
576P (50 Hz)	576I (50 Hz)
625P (50 Hz)	625I (50 Hz)
720P (60 Hz)	1035I (60 Hz)
1080I (50 Hz)	1080I (60 Hz)

*2 The 5-BNC connectors are used as RGB/PC2, HD/

DVD2 and VIDEO3 input. Select one of them under “BNC SELECT”.

*3 It doesn’t cope with copy protection.

Other Features	3D motion adaptive Scan Converter
	with 2-2 (50Hz), 2-3 (60Hz) pull down
	Converter, Digital Zoom function
	(100-900% Selectable),
	Self Diagnosis, Anti Image Burn,
	Color Temperature Select, Control Lock,
	Power management, Plug and play
	(DDC1, DDC2b, RGB3: DDC2b only)

Accessories	Remote control with two AAA batteries,
	Power cord, User’s Manual, Safety metal
	fittings, Screw for Safety metal fittings,
	Ferrite cores, Bands

Regulations	UL Approved (UL 60950/ CSA 60950)
	DOC Canada requirements
	Meets FCC class A requirements

55

Image 62

Marantz PD4293D Specifications, 1 HD/DVD/DTV input signals supported on this system, It doesn’t cope with copy protection

Contents

Plasma Monitor Model PD4293D User GuideImportant Information PrecautionsWarnings and Safety Precaution Use the band to fasten the ferrite core supplied to the DVI cable Mises en garde et précautions de sécurité PrécautionsDOC avis de conformation AVERTISSEMENTREMARQUE Before requesting service What is covered?What is excluded? To get warranty serviceContents OSM ControlsDrawing A Drawing B Ventilation Requirements for enclosure mountingunit. Wall mount unit, Stand, etc. * See page How to Attach Options to the Plasma MonitorIntroduction The features you’ll enjoy includeContents of the Package Introduction to the Plasma Monitory VOLUME DOWN and UP q Powere POWER/STANDBY indicator Part Names and FunctionB EXT SPEAKER L and R Rear View/ Terminal BoardA AC IN D VIDEO10VOLUME + Remote Controlq POWER ON/OFF Switches Power ON/OFF w RGB/PC5Remote control signal transmitter Battery Installation and Replacement4OFF TIMER 2WIDEHandling the remote control Operating RangeIBM VGA or Compatibles InstallationPersonal computer with a digital RGB output Macintosh or CompatiblesConnecting Your DVD Player Connecting Your Document CameraConnecting Your VCR or Laser Disc Player Connections with Equipment that has a Digital InterfaceLEFT External Speaker ConnectionsRIGHT AUDIOSignal Analog Pin Assignments and Signal Levels for 15 pin RGB AnalogPin Configuration and Signal of the RGB 3 IN Connector DVI Connector Signal DigitalTo adjust the volume POWERVOLUME To cancel the soundTo cancel the off timer OFF TIMERTo set the off timer After the power is turned off with the off timerWIDE Operations When watching videos or digital video discsWhen watching high definition video source Watching with a wide screen manualInformation Supported resolutionWatching computer images with a wide screen 2. Within 3 secondsOSMOn Screen Menu Controls Menu OperationsNote The main menu disappears by pressing the EXIT button AUTO 1 RGB/PC only 2 PLE AUTO ORBITER OFF INVERSE OFF SCREEN WIPER OFF3 AUDIO1 VIDEO1 AUDIO2 HD/DVD1 AUDIO3 RGB1 AUTO1Press the PROCEED button on the remote control to Picture Settings MenuAdjusting the picture 4. Once the adjustment is completed Types of picture modes Setting the picture mode according to the brightness of the room3. To set to “THEATER” Press the PROCEED button on the remote control to Setting the color temperature Setting the color temperature4. Once the setting is completed Press the PROCEED button on the remote control to Adjusting the white balance Adjusting the color to the desired quality7. Once the adjustment is completed Press the PROCEED button on the remote control to Types of noise reduction Reducing noise in the picture NR Press the PROCEED button on the remote control to2. To adjust the bass Sound Settings MenuAdjusting the treble, bass and left/right balance To continue adjusting the soundTo select a mode Screen Settings MenuAdjusting the Position, Size, Fine Picture, Picture Adj 2. To adjust the vertical positionExample Turning the on-screen menu mode off Function Settings MenuSetting the on-screen menu Adjusting the Auto PictureAdjusting the position of the menu display Adjusting the position of the menu display3. To adjust the position Press the PROCEED button on the remote control toPower management function Setting the power management for computer images3. To turn the power management function on Power management settingsTurning the picture back on POWER/STANDBY indicatorDescription 3. To set the CINEMA MODE to “OFF” Setting the picture to suit the movie3. To adjust the “GRAY LEVEL” CINEMA MODEReducing burn-in of the screen Setting RGB3 ADJWhen you adjust the RGB3 ADJ display MAIN MENU on the screen, thenORBITER Setting the time for “INVERSE”5. Once the setting is completed INVERSESetting the time Setting the time for “SCREEN WIPER”6. Once the setting is completed To select “ON” for the “WORKING TIME”6. Once the setting is completed Resetting to the default valuesTo select “ON” for “WORKING TIME” Setting the time3. To set the AUDIO1 to “VIDEO2” Options Settings MenuSetting the allocation of the audio connectors COMP3. To set the BNC SELECT mode to “COMP.” Setting the BNC connectorsSetting a computer image to the correct RGB select screen 3. To set the RGB select mode to “MOTION”3. To set the HD SELECT mode to “1035I” Setting high definition images to the suitable screen sizeSee page 52 for the details of the above settings RGB SELECT modesLanguage settings Checking the frequencies, polarities of input signals, and resolutionSetting the language for the menus Information Menu3. To select “3.58 NTSC” Setting the video signal formatVideo signal formats Press the PROCEED button on the remote control toCheck Sum CKS, Error Processing, and ACK Type of connector D-Sub 9-pin maleCommand External Control02. Power OFF Command Reference List01. Power ON 03. Input Switch Change06. AUDIO Mute Off 04. VOLUME Gain Data05. AUDIO Mute On 07. CONTRAST Gain Data13. COLOR TEMP SELECT 12. PICTURE MODE Select10. COLOR Gain Data 11.TINT Gain Data18. BASS Gain Data 17. NR MODE Set15. GREEN Gain Data 16. BLUE Gain Data23. H. POSITION Gain Data 21. SCREEN MODE Select20. BALANCE Gain Data 24. V-HEIGHT Gain Data28. CLOCK Gain Data 27. PHASE Gain Data26. AUTO PICTURE Select 29. OSM Select30. OSM ADJ. Gain Data 31. POWER MGT Select33. CINEMA MODE Set 32. GRAY LEVEL Set37. SCREEN WIPER Set 38. RESET36. INVERSE Set 39. Audio Select Set42. HD Select 40. BNC SELECT41. RGB Select 43. LANGUAGE SelectHorizontal sync polarity 46. Input MODE Request45. FREQUENCY Request 47. VIDEO ADJ Request 03H PRO50. MODEL NAME Request 49. Failure Mode Request48. Audio Select Request HD HD1 or DTV or DTVComputer input signals supported by this system Table of Signals SupportedSupported resolution 7 Other screen modes ZOOM and STADIUM are available as well With digital input some signals are not acceptedIf you are connecting a composite sync signal, use the HD terminal Checks TroubleshootingSymptom Remedy2 The 5-BNC connectors are used as RGB/PC2, HD Specifications1 HD/DVD/DTV input signals supported on this system DVD2 and VIDEO3 input. Select one of them under “BNC SELECT”Page 09/2001 R is a registered trademarkPrinted in Japan MITar