Marantz PD4293D manual Options Settings Menu, Setting the allocation of the audio connectors, Comp

Options Settings Menu

Setting the allocation of the audio connectors

Setting the AUDIO 1, 2, and 3 connectors to the desired input.

Example: Setting “AUDIO 1” to “VIDEO 2”

Press the PROCEED button on the remote control to

display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “OPTIONS”, then press the PROCEED button.

The “OPTIONS” screen appears.

2.Use the ▲ and ▼ buttons to select “AUDIO 1”.

O P T I O N S

AUDIO INPUT
		: VIDEO1
	AUDIO1
	AUDIO2	: HD/DVD1
	AUDIO3	: RGB1
BNC SELECT		: RGB
RGB SELECT		: AUTO
HD SELECT		:	1080B
	SEL.	ADJ.			RETURN
				EXIT

3.To set the AUDIO1 to “VIDEO2”...

Use the ◀ and ▶ buttons to select “VIDEO2”.

The mode switches as follows each time the ◀ or ▶ button is pressed:

The available sources depend on the setting of “BNC SELECT”.

RGB:	→ VIDEO1 ↔ VIDEO2 ↔ HD/DVD/DTV←
	→RGB/PC3 ↔RGB/PC2 ↔RGB/PC1 ←
COMP.:	→ VIDEO1 ↔ VIDEO2 ↔ HD1/DVD1/DTV1←
	→RGB/PC3 ↔RGB/PC1 ↔HD2/DVD2/DTV2 ←
VIDEO:	→ VIDEO1 ↔ VIDEO2 ↔ VIDEO3←
	→RGB/PC3 ↔RGB/PC1 ↔HD/DVD/DTV ←

O P T I O N S

AUDIO INPUT
		: VIDEO2
	AUDIO1
	AUDIO2	: HD/DVD1
	AUDIO3	: RGB1
BNC SELECT		: RGB
RGB SELECT		: AUTO
HD SELECT		:	1080B
	SEL.	ADJ.			RETURN
				EXIT

4.Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

⬛AUDIO INPUT

A single audio input cannot be selected as the audio channel for more than one input terminal.

⬛Restoring the factory default settings

Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.

34