Advantech RS-485 user manual Syntax $aaSi9shhhhcr

		Chapter 6
$aaSi9shhhh		$aaSi9shhhh
Name	CJC Zero Calibration (ADAM-5018 only)
Description	Calibrates an analog input module to adjust for offset
	errors of its CJC (Cold Junction Compensation) sensor
Syntax	$aaSi9shhhh(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system.
	Si identifies the I/O slot which contains the CJC Status
	you wish to retrieve.
	9 is CJC Status command.
	s sign, + or -, indicates whether to increase or decrease
	the CJC offset value.
	hhhh is a four character hexadecimal “count” value.
	Each count equals approximately 0.009°C. The value can
	range from 0000 to FFFF.
	(cr) is the terminating character, carriage return (0Dh)
Response	!aa(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.

There is no response if the module detects a syntax error or communication error or if the specified address does not exist.

! delimiter character indicating a valid command was received.

? delimiter character indicating the command was invalid.

aa (range 00-FF) represents the 2-character hexadecimal address of an ADAM-5000 system.

(cr) is the terminating character, carriage return (0Dh)

ADAM-5000 6-55