Advantech RS-485 user manual Command Set Analog Output, Analog Output Command Set

Command Set		5024 Analog Output
6.8 Analog Output Command Set
	Command Syntax	Command Name	Description
	$aaSiCjArrff	Configuration	Sets the output range, data
			format and slew rate for a
			specified channel in a
			specified analog output
			module in a specified
			system.
	$aaSiCjB	Configuration Status	Returns the configuration
			parameters of a specified
			channel in a specified analog
			output module of a specified
			system.
	#aaSiCj(data)	Analog Data Out	Sends a digital value from
			the host computer to a
			specified channel of a
			specified slot in a specified
			ADAM-5000 system for
			output as an analog signal.
	$aaSiCj4	Start-Up Output	Stores a default output value
		Current/Voltage	in a specified channel. The
		Configuration	output value will take effect
			upon startup or reset.
	$aaSiCj0	4 mA Calibration	Directs the specified channel
			to store parameters following
			a calibration for 4 mA output
	$aaSiCj1	20 mA Calibration	Directs the specified channel
			to store parameters following
			a calibration for 20 mA
			output
	$aaSiCj3hh	Trim Calibration	Trims the specified channel a
			specified number of units up
			or down
	$aaSiCj6	Last Value Readback	Returns either the last value
			sent to the specified channel
			by a #aaSiCj(data)
			command, or start-up output
			current/voltage.

6-90 ADAM-5000