
Chapter 5
underneath. To resend a command simply press <Enter>.
Choose Full Screen to select Terminal Emulation mode. This mode provides additional information on the configuration status under Settings shown at the right side of the screen. Previous commands and responses will remain on the screen for reference. To repeatedly send a command, press <F10> and a dialog box will appear into which you can enter the command. Press <Enter> to send the command which will automatically repeat. Press any key to stop repeating the command.
Figure 5-4 Terminal emulation
Download Procedure: New ADAM-5000/485 Firmware
A new set of firmware is provided for the
1.Connect the COM port of the host computer with the