6-6 ADAM-5000
Command Set
%aannccff %aannccff(cr) is the terminating character, carriage return (0Dh).
Example command: %23000A40(cr)
response: !23(cr)
The ADAM-5000 system with address 23h is configured
to a baud rate of 115.2 Kbps and with checksum genera-
tion or validation.
The response indicates that the command was received.
Wait 7 seconds to let the new configuration setting take
effect before issuing a new command to the system.
Note: All configuration parameters can be changed dynami-
cally, except checksum and baud rate parameters.
They can only be altered when the INIT* terminal is
grounded.
Baud Rate
Code
Baud Rate
03h 1200 bps
04h 2400 bps
05h 4800 bps
06h 9600 bps
07h 19.2 Kbps
08h 38.4 Kbps
09h 57.6 Kbps
0Ah 115.2 Kbps
Figure 6-1 Baud rate codes
CPU