| 5013/5017/5017H/5018 |
Command Set | Analog Input Alarm |
|
|
$aaSiCjAhU(data) | $aaSiCjAhU(data) |
Name | Set Alarm Limit |
Description | Sets the High/Low alarm limit value for the specified |
| input channel of a specified |
Syntax | $aaSiCjAhU(data)(cr) |
| $ is a delimiter character. |
| aa (range |
| address of an |
| SiCj identifies the desired slot i (i : 0 to 3) and the |
| desired analog input channel j (j : 0 to 7). |
| AhU is the Set Alarm Limit command. |
| h indicates alarm type and can have the value H = High |
| alarm, L = Low alarm |
| (data) represents the desired alarm limit setting. The |
| format is always in engineering units. |
| (cr) represents terminating character, carriage return |
| (0Dh) |
Response | !aa(cr) if the command was valid |
| There is no response if the system detects a syntax error |
| or communication error or if the specified address does |
| not exist. |
| ! delimiter character indicating a valid command was |
| received. |
| aa represents the |
| corresponding |
| (cr) represents terminating character, carriage return |
| (0Dh) |