Advantech RS-485 user manual Syntax $aaSiCjChcr

	5013/5017/5017H/5018
Command Set	Analog Input Alarm
$aaSiCjCh	$aaSiCjCh

Name	Clear Latch Alarm
Description	Sets the High/Low alarm to OFF (no alarm) for the
	specified input channel in the addressed ADAM-5000
	system
Syntax	$aaSiCjCh(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	SiCj identifies the desired slot i (i : 0 to 3) and the
	desired channel j (j : 0 to 7).
	Ch is the Clear Latch Alarm command.
	h indicates alarm type and can have the value H = High
	alarm, L = Low alarm
	(cr) represents terminating character, carriage return
	(0Dh)
Response	!aa(cr) if the command was valid
	There is no response if the system detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	aa represents the 2-character hexadecimal address of the
	corresponding ADAM-5000 system.
	(cr) represents terminating character, carriage return
	(0Dh)

6-78 ADAM-5000