Advantech RS-485 user manual Set the High/Low alarm limit value for the specified input

Chapter 6

$aaSiCjAhU(data)$aaSiCjAhU(data)

Name	Set Alarm Limit
Description	Set the High/Low alarm limit value for the specified input
	channel of a specified ADAM-5000 system.
Syntax	$aaSiCjAhU(data)(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	SiCj identifies the desired slot i and the desired channel j.
	AhU is the Set Alarm Limit command.
	h indicates alarm type and can have the value H = High
	alarm, L = Low alarm
	(data) represents the desired alarm limit setting. The
	value is from 0 to 4294967295. Be aware that (data) has
	10 characters.
	(cr) represents terminating character, carriage return (0Dh)
Response	!aa(cr) if the command was valid
	There is no response if the system detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	aa represents the 2-character hexadecimal address of the
	corresponding ADAM-5000 system.
	(cr) represents terminating character, carriage return (0Dh)

ADAM-5000 6-157