Advantech RS-485 user manual Syntax $aaSiCj1cr

	Chapter 6
$aaSiCj1	$aaSiCj1
Name	20 mA Calibration
Description	Directs the specified channel to store parameters
	following a calibration for 20 mA output
Syntax	$aaSiCj1(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system.
	SiCj identifies the I/O slot i (i : 0 to 3) and the channel
	j (j : 0 to 3) of the module you want to calibrate.
	1 is the 20 mA calibration command.
	(cr) is the terminating character, carriage return (0Dh)
Response	!aa(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.
	There is no response if the module detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was
	invalid.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	(cr) is the terminating character, carriage return (0Dh)

Note: Before issuing the 20 mA Calibration command, the analog output module should be trimmed to the correct value using the Trim Calibration command. Either a mA meter or a resistor and voltmeter should

ADAM-5000 6-101