Advantech RS-485 user manual Syntax $aaSiAFFff

		Chapter 6
$aaSiAFFff		$aaSiAFFff
Name		Set Data Format
Description		Sets the data format in engineering units or in two's
		complement format for a specified analog input module
		in a specified system.
Syntax		$aaSiAFFff
		$ is a delimiter character.
		aa (range 00-FF) represents the 2-character hexadecimal
		address of the ADAM-5000 system you want to
		configure.
		Si identifies the I/O slot of the ADAM-5000 system
		containing the ADAM-5017H module you want to
		configure.
		AFF represents the set data format command.
		ff represents the 2-character hexadecimal code of the
		data format. 00 is for engineering unit format. 02 is for
		two’s complement format.
Note:	Each channel in an ADAM-5017H module may be set
	to a different range, but the data formats of all
	channels in this module must be the same.
		(cr) is the terminating character, carriage return (0Dh).
Response		!aa(cr) if the command is valid.
		?aa(cr) if an invalid operation was entered.

There is no response if the module detects a syntax error or communication error or if the specified address does not exist.

! delimiter character indicating a valid command was received.

? delimiter character indicating the command was

ADAM-5000 6-63