Advantech RS-485 user manual Alarm Settings, Digital Filter

Chapter 5

5.4.12 Alarm Settings

∙Set the alarm status, high alarm value, low alarm value, and then click the Update button.

∙Alarm setting: Disables or enables the alarm either in Latching or Momentary mode.

∙High alarm value: Downloads the high alarm limit value into the module. The format is always in engineering units.

∙Low alarm value: Downloads the low alarm limit value into the module. The format is always in engineering units.

Digital Filter

∙High level voltage: Set the high trigger level for non-isolated input signals. The range is from 0.1 V to 5.0 V. This high trigger level must be higher than the low trigger level at all times.

ADAM-5000 5-27