Advantech RS-485 user manual Read Alarm Disable/Latch

	Chapter 6
$aaSiCjAh	$aaSiCjAh
Name	Read Alarm Disable/Latch
Description	Return the alarm mode for the specified channel.
Syntax	$aaSiCjAh(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	SiCj identifies the desired slot i and the desired channel j.
	A is the Read Alarm Mode command.
	h indicates alarm type and can have the value H = High
	alarm, L = Low alarm
	(cr) represents terminating character, carriage return (0Dh)
Response	!aap(cr) if the command was valid
	There is no response if the system detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	aa represents the 2-character hexadecimal address of the
	corresponding ADAM-5000 system.
	p indicates alarm mode.
	p=D, if alarm is Disable.
	P=L, if alarm is Latch.
	(cr) represents terminating character, carriage return (0Dh)

ADAM-5000 6-149