ADAM-5000 6-59
Chapter 6
$aaSiCjArrFF $aaSiCjArrFF
Name Set Input Range
Description Sets the input range for a specified channel of a speci-
fied analog input module in a specified system.
Syntax $aaSiCjArrFF
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadecimal
address of the ADAM-5000 system you want to
configure.
SiCj identifies the slot i (i:0 to 3) of the ADAM-5000
system and the channel j (j:0 to 7) of the ADAM-5017H
whose range you want to set.
A represents the set input range command.
rr represents the 2-character hexadecimal code of the
input range. (See Appendix B)

Note: Each channel in a ADAM-5017H module may be set

to a different range, but the data formats of all

channels in this module must be the same.

(cr) is the terminating character, carriage return (0Dh).
Response !aa(cr) if the command is valid.
?aa(cr) if an invalid operation was entered.
There is no response if the module detects a syntax error
or communication error or if the specified address does
not exist.
! delimiter character indicating a valid command was
received.
? delimiter character indicating the command was
invalid.
aa (range 00-FF) represents the 2-character hexadecimal