Advantech RS-485 user manual Name, Description, Syntax Aannccffcr, Response

	Chapter 6
%aannccff	%aannccff
Name	Configuration
Description	Sets baud rate and checksum status for a specified
	ADAM-5000 system.
Syntax	%aannccff(cr)
	% is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system you want to
	configure.
	nn is reserved for system use. Its default value is 00h.
	cc represents the baud rate code.
	ff is a hexadecimal number that equals the 8-bit parame-
	ter representing checksum status. The sixth bit repre-
	sents the checksum status; 1 means enabled while 0
	means disabled. The other bits are not used and are set
	to 0.
	(cr) is the terminating character, carriage return (0Dh).
Response	!aa(cr) if the command is valid.
	?aa(cr) if an invalid parameter was entered or if the
	INIT* terminal was not grounded when attempting to
	change baud rate or checksum settings. There is no
	response if the module detects a syntax error, communi-
	cation error or if the specified address does not exist.
	! delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was in-
	valid.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.

ADAM-5000 6-5