Advantech RS-485 user manual $aaSiCjAhUdata$aaSiCjAhUdata, Example command $03S0C1AHU+080.00cr

Chapter 6

$aaSiCjAhU(data)$aaSiCjAhU(data)

Example command: $03S0C1AHU+080.00(cr)

response: !03(cr)

Channel 1 of slot 0 in the ADAM-5000 system at address 03h is configured to accept type-T thermocou- ple input. The command will set its High alarm limit to +80°C.

The system confirms the command has been received.

Note: An analog input module requires a maximum of 2 seconds after it receives a Set Alarm Limit command to let the settings take effect. During this interval, the module cannot be addressed to perform any other actions.

ADAM-5000 6-85