Advantech RS-485 user manual Syntax $aaSiArrffcr

	Chapter 6
$aaSiArrff	$aaSiArrff
Name	RTD Configuration
Description	Sets slot index, input range, data format and integration
	time for a specified RTD input module in a specified
	system.
Syntax	$aaSiArrff(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system you want to
	configure.
	Si identifies the desired slot i (i:0to3).
	A represents the I/O module configuration command.
	rr represents the 2-character hexadecimal code of the
	input range. (See Appendix B)
	ff is a hexadecimal number that equals the 8-bit parame-
	ter representing data format. Bits 0 and 1 represent data
	format. Bit 7 represents integration time. The layout for
	the 8-bit parameter is shown in Figure 6-3 (See page 6-
	38). The other bits are not used and are set to 0. (cr) is
	the terminating character, carriage return (0Dh).
Response	!aa(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.
	There is no response if the module detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was
	invalid.
	aa (range 00-FF) represents the 2-character hexadecimal

ADAM-5000 6-21