Advantech RS-485 user manual Zero calibration

Chapter 4

4.Execute the Zero Calibration command (also called the Offset Calibration command). This is also done with the ADAM utility software. (See the “Zero Calibration” option in the Calibration sub- menu of the ADAM utility software.)

Figure 4-15: Zero calibration

5.Execute the Span Calibration command. This can be done with the ADAM utility software. (See the “Span Calibration” option in the Calibration sub-menu of the ADAM utility software.)

Figure 4-16: Span calibration

ADAM-5000 4-19