Advantech RS-485 user manual Set Configuration

		5080 Counter/
Command Set		Frequency Module
$aaSiArrff		$aaSiArrff
Name	Set Configuration
Description	Set slot index and counter mode.
Syntax	$aaSiArrff(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system you want to
	configure.
	Si identifies the I/O slot i you want to configure.
	A is command for setting I/O module configuration.
	rr indicates which mode is.
	rr=00 represents Bi-direction counter mode.
	rr=01 represenrs UP/DOWN counter mode.
	rr=02 represents Frequency mode.
	ff indicates which format is
	ff=00 represents the engineer format.
	ff=02 represents the hexdecimal format.
Response	!aa(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.

There is no response if the module detects a syntax error or communication error or if the specified address does not exists.

! delimiter character indicating a valid command was received.

? delimiter character indicating the command was invalid.

aa (range 00-FF) represents the 2-character hexadecimal address of an ADAM-5000 system.

(cr) is the terminating character, carriage return (0Dh)

6-122 ADAM-5000