Nortel Networks TP-1610 SIP ResetWebPassword, DisableWebConfig, HTTPport, UseProductName

Mediant 2000 SIP User’s Manual 6. ini File Configuration of the Mediant 2000

Table 6-1: Basic, Logging, Web and RADIUS Parameters (continues on pages 90 to 97)

ini File Field Name		Valid Range and Description
Web Parameter Name*
ResetWebPassword	Allows resetting to default of Web password to:
	Username: “Admin”
	Password: “Admin”
DisableWebConfig	0	= Enable changing parameters from Web (default)
	1	= Operate Web Server in “read only” mode
HTTPport	HTTP port used for Web management (default = 80)

Customizing the Web Appearance Parameters

For detailed information on customizing the Web Interface, refer to Appendix F on page 207.

UseProductName	0 = Disabled (default).
	1 = Enabled.
	If enabled, the ‘UserProductNane’ text string is displayed instead of the default
	product name.
UserProductName	Text string that replaces the product name.
	The default is “Mediant 2000”.
	The string can be up to 29 characters.
UseWebLogo	0 = Logo image is used (default).
	1 = Text string is used instead of a logo image.
	If enabled, AudioCodes’ default logo (or any other logo defined by the
	‘LogoFileName’ parameter) is replaced with a text string defined by the
	‘WebLogoText’ parameter.
WebLogoText	Text string that replaces the logo image.
	The string can be up to 15 characters.
LogoWidth	Width (in pixels) of the logo image.
	Note: The optimal setting depends on the resolution settings.
	The default value is 441, which is the width of AudioCodes’ displayed logo.
LogoFileName	Name of the image file containing the user’s logo.
	File name can be up to 47 characters.
	The logo file name can be used to replace AudioCodes’ default Web logo with a User
	defined logo.
	Use a gif, jpeg or jpg image file.
BkgImageFileName	Name of the file containing the user’s background image.
	File name can be up to 47 characters.
	The background file can be used to replace AudioCodes’ default background image
	with a User defined background.
	Use a gif, jpeg or jpg image file.

RADIUS-Related Parameters

For detailed information on the supported RADIUS attributes, refer to Section K.7 on page 251.

EnableRADIUS	0	= RADIUS application is disabled (default).
[Enable RADIUS]	1	= RADIUS application is enabled.
AAAIndications	0	= No indications (default).
[AAA Indications]	3	= Accounting only
MaxRADIUSSessions	Number of concurrent calls that can communicate with the RADIUS server (optional).
[Max. RADIUS Sessions]	The valid range is 0 to 240.
	The default value is 240.
SharedSecret	“Secret” used to authenticate the gateway to the RADIUS server. It should be a
[Shared Secret]	cryptographically strong password.
RADIUSRetransmission	Number of retransmission retries.
[RADIUS Max.	The valid range is 1 to 10.
Retransmissions]	The default value is 3.
RadiusTO	The interval between each retry (measured in seconds).
	The valid range is 1 to 30.
	The default value is 10.
RADIUSAuthServerIP
[RADIUS Authentication Server	IP address of Authentication and Authorization server.
IP Address]

Version 4.4 95 July 2005