Nortel Networks TP-1610 SIP user manual Customizing the Product Name

Mediant 2000 SIP

6.To save the image to flash memory so it is available after a power fail, refer to Section 5.12 on page 84.

The new background appears on all Web Interface screens.

Tip 1: If you encounter any problem during the loading of the files, or you want to restore the default images, click the Restore Default Images button.

Tip 2: When replacing both the background image and the logo image, first load the logo image followed by the background image.

To replace the background image via the ini file, take these 2 steps:

1.Place your background image file in the same folder as where the device’s ini file is located (i.e., the same location defined in the BootP/TFTP configuration utility). For detailed information on the BootP/TFTP, refer to Appendix B on page 189.

2.Add/modify the ini file parameters in Table F-3according to the procedure described in Section 6.2 on page 87.

Note that loading the device’s ini file via the ‘Configuration File’ screen in the Web Interface doesn’t load the logo image file as well.

	Table F-3:Customizable Logo ini File Parameters
Parameter	Description
BkgImageFileName	The name (and path) of the file containing the new background.
	Use a gif, jpg or jpeg image file.
	The default is AudioCodes background file.
	Note: The length of the name of the image file is limited to 47 characters.

F.3 Customizing the Product Name

The Product Name text string can be modified according to OEMs specific requirements.

•To replace AudioCodes’ default product name with a text string via the Web Interface, modify

the two ini file parameters in Table F-4according to the procedure described in Section F.4 on page 211.

•To replace AudioCodes’ default product name with a text string via the ini file, add/modify the

two ini file parameters in Table F-4according to the procedure described in Section 6.2 on page 87.

Table F-4:Web Appearance Customizable ini File Parameters

Parameter	Description
UseProductName	0	= Don’t change the product name (default).
	1	= Enable product name change.
UserProductName	Text string that replaces the product name.
	The default is “Mediant 2000”.
	The string can be up to 29 characters.

Mediant 2000 SIP User’s Manual 210 Document #: LTRT-72504