Nortel Networks TP-1610 SIP user manual IPProfileID, TelProfileID

Mediant 2000 SIP

Table 6-3: SIP Configuration Parameters (continues on pages 100 to 110)

ini File Field Name	Valid Range and Description
Web Parameter Name*
IPProfile_ID	IPProfile_<Profile ID> =
[IP Profile Settings]	<Profile Name>,<Preference>,<Coder Group ID>,<IsFaxUsed *>,<DJBufMinDelay *>,
	<DJBufOptFactor *>,<IPDiffServ *>,<ControlIPDiffServ
	*>,<EnableSilenceCompression>, <RTPRedundancyDepth>
	Preference = (1-10) The preference option is used to determine the priority of the
	Profile. If both IP and Tel profiles apply to the same call, the coders and other common
	parameters of the preferred Profile are applied to that call. If the Preference of the Tel
	and IP Profiles is identical, the Tel Profile parameters are applied.
	For example:
	IPProfile_1 = name1,2,1,0,10,13,15,44,1,1
	IPProfile_2 = name2,$$,$$,$$,$,$$,$$,$$,$$,1
	$$ = Not configured, the default value of the parameter is used.
	(*) = Common parameter used in both IP and Tel profiles.
	Note 1: The IP ProfileID can be used in the Tel2IP and IP2Tel routing tables (Prefix and
	PSTNPrefix parameters).
	Note 2: ‘Profile Name’ assigned to a ProfileID, enabling User’s to identify it intuitively
	and easily.
	Note 3: This parameter can appear up to 4 times.
TelProfile_ID	TelProfile_<Profile ID> =
[Tel Profile Settings]	<Profile Name>,<Preference>,<Coder Group ID>,<IsFaxUsed *>,<DJBufMinDelay *>,
	<DJBufOptFactor *>,<IPDiffServ *>,<ControlIPDiffServ*>,<DtmfVolume>,<InputGain>,
	<VoiceVolume>, <EnableDigitDelivery>, <ECE>
	Preference = (1-10) The preference option is used to determine the priority of the
	Profile. If both IP and Tel profiles apply to the same call, the coders and other common
	parameters of the preferred Profile are applied to that call. If the Preference of the Tel
	and IP Profiles is identical, the Tel Profile parameters are applied.
	For examples:
	TelProfile_1 = FaxProfile,1,2,0,10,5,22,33,2,22,34,1,1
	TelProfile_2 = ModemProfile,0,10,13,$$,$$,$$,$$,$$,0,$$,0,1
	$$ = Not configured, the default value of the parameter is used.
	(*) = Common parameter used in both IP and Tel profiles.
	Note 1: The Tel ProfileID can be used in the Trunk Group table (TrunkGroup_x
	parameter).
	Note 2: ‘Profile Name’ assigned to a ProfileID, enabling User’s to identify it intuitively
	and easily.
	Note 3: This parameter can appear up to 4 times.

Mediant 2000 SIP User’s Manual 110 Document #: LTRT-72504