Nortel Networks TP-1610 SIP AssertedIdMode, EnableRPIheader, SIPDestinationPort, LocalSIPPort

Mediant 2000 SIP User’s Manual 6. ini File Configuration of the Mediant 2000

Table 6-3: SIP Configuration Parameters (continues on pages 100 to 110)

ini File Field Name		Valid Range and Description
Web Parameter Name*
AssertedIdMode	0	= None (default).
[Asserted Identity Mode]	1	= P-asserted.
	2	= P-preferred.
	The Asserted ID mode defines the header that is used in the generated INVITE
	request. The header also depends on the calling Privacy: allowed or restricted.
	The P-asserted (or P-preferred) headers are used to present the originating party’s
	Caller ID. The Caller ID is composed of a Calling Number and (optionally) a Calling
	Name.
	P-asserted (or P-preferred) headers are used together with the Privacy header. If Caller
	ID is restricted the “Privacy: id” is included. Otherwise, for allowed Caller ID the
	“Privacy: none” is used. If Caller ID (received from PSTN) is restricted, the From header
	is set to <anonymous@anonymous.invalid>.
EnableRPIheader	0	= Disable (default)
[Enable Remote Party ID]	1	= RPI (Remote-Party-ID) headers are generated in SIP INVITE message for both
	called and calling numbers.
SIPDestinationPort	SIP UDP destination port for sending SIP messages.
[SIP Destination Port]	The default port is 5060.
LocalSIPPort	Local UDP port used to receive SIP messages.
[SIP Local Port]	The default port is 5060.
IsUserPhone	0	= Doesn’t use "user=phone" string in SIP URL.
[Use “user=phone” in SIP	1	= "user=phone" string is part of the SIP URL (default).
URL]
IsUserPhoneInFrom	0	= Doesn’t use ";user=phone" string in From header (default).
[Use “user=phone” in From
	1	= ";user=phone" string is part of the From header.
header]
EnablePtime	0	= Remove the ptime header from SDP.
	1	= Include the ptime header in SDP (default).

Version 4.4 103 July 2005