Nortel Networks TP-1610 SIP user manual Advanced Configuration, Configuring the Network Settings

Mediant 2000 SIP

5.9Advanced Configuration

Use this menu to set the gateway’s advanced configuration parameters (for advanced users only).

5.9.1Configuring the Network Settings

From the Network Settings page you can define:

•IP settings.

•NTP settings.

•Syslog settings.

•SNMP settings.

•RTP settings.

•Ethernet Ports Information (read-only).

To configure the Network Settings parameters, take these 4 steps:

1.Open the ‘Network Settings’ screen (Advanced Configuration menu > Network Settings); the ‘Network Settings’ screen is displayed.

2.Configure the Network Settings parameters.

3.Click the Submit button to save your changes.

4.To save the changes so they are available after a power fail, refer to Section 5.12 on page 84.

Figure 5-14: Network Settings Screen

Note that the default RTP Base UDP Port is		6000.
Mediant 2000 SIP User’s Manual	62	Document #: LTRT-72504