Nortel Networks TP-1610 SIP user manual Cabling the Mediant, Item # Label

Mediant 2000 SIP

2.You’re now recommended to take the optional steps of fastening the device to the frame of the rack (as described above) while it is placed on the shelf, so preventing it from sliding when inserting cables into connectors on the rear panel.

3.4Cabling the Mediant 2000

Refer to Section 2 on page 19 for detailed information on the Mediant 2000 rear panel connectors and LEDs.

Note that the Mediant 2000 is available in many configurations, i.e., AC or DC, in the 16-trunk, 8- trunk, 4-trunk, 2-trunk or 1-trunk device. The 16-trunk dual AC (Figure 3-3) and the 8-trunk DC (Figure 3-4) configurations are illustrated here as representative products.

Figure 3-3: Mediant 2000 Rear Panel Cabling (16 Trunks, Dual AC Power)

1	2		3	2	1	4	5
Table 3-1: Mediant 2000 Rear Panel Cabling (16 Trunks, Dual AC Power) Component Descriptions
Item #		Label		Component Description
1				RTM locking screws.
2	ETHERNET			Two Category 5 network cables, connected to the 2 Ethernet RJ-45
				ports.
3	TRUNKS			Two 50-pin Telco connector cables, each supporting 8 trunks.
4				Protective earthing screw.
5	100-240~1.5A			Dual AC power cables.

Mediant 2000 SIP User’s Manual 30 Document #: LTRT-72504