Nortel Networks TP-1610 SIP user manual Ac-Analog-Mib Ac-Control-Mib Ac-Media-Mib Ac-Pstn-Mib

Mediant 2000 SIP User’s Manual 11. SNMP-Based Management

Note: The acBoard MIB is still supported but is being replaced by five newer proprietary MIBs.

The acBoard MIB has the following groups:

boardConfiguration boardInformation channelConfiguration channelStatus reset

acTrap

As noted above, five new MIBs cover the device’s general parameters. Each contains a Configuration subtree for configuring related parameters. In some, there also are Status and Action subtrees.

The 5 MIBs are:

1.AC-ANALOG-MIB

2.AC-CONTROL-MIB

3.AC-MEDIA-MIB

4.AC-PSTN-MIB

5.AC-SYSTEM-MIB Other proprietary MIBs are:

•acGateway MIB - This proprietary MIB contains objects related to configuration of the device when applied as a SIP or H.323 media gateway only. This MIB complements the other proprietary MIBs.

The acGateway MIB has the following groups:

Common - for parameters common to both SIP and H.323

SIP - for SIP parameters only

H.323 - for H.323 parameters only

•acAtm - This proprietary MIB contains objects related to configuration and status of the device when applied as an ATM media gateway only. This MIB complements the other proprietary MIBs.

The acAtm MIB has the following groups:

acAtmConfiguration - for configuring ATM related parameters acAtmStatus - for the status of ATM connections

•acAlarm - This is AudioCodes' proprietary carrier-grade alarm MIB. It is a simpler implementation of the notificationLogMIB and the IETF suggested alarmMIB (both also supported in all AudioCodes’ devices).

The acAlarm MIB has the following groups:

ActiveAlarm - straightforward (single-indexed) table, listing all currently active alarms, together with their bindings (the alarm bindings are defined in acAlarm. acAlarmVarbinds and also in acBoard.acTrap. acBoardTrapDefinitions. oid_1_3_6_1_4_1_5003_9_10_1_21_2_0).

acAlarmHistory - straightforward (single-indexed) table, listing all recently raised alarms together with their bindings (the alarm bindings are defined in acAlarm.

Version 4.4 175 July 2005