Nortel Networks TP-1610 SIP user manual Load a cmp File Screen

Mediant 2000 SIP User’s Manual 5. Web Management

Note: At this point, the process can be canceled with no consequence to the Mediant 2000 (click the Cancel button). If you continue the process (by clicking the Start Software Upgrade button, the process must be followed through and completed with a Mediant 2000 reset at the end. If you click the Cancel button in any of the subsequent screens, the Mediant 2000 is automatically reset with the configuration that was previously burned in flash memory.

3.Click the Start Software Upgrade button; the ‘Load a cmp file’ screen appears (Figure 5-30).

Note: When in the Wizard process, the rest of the Web application is unavailable and the background Web screen is disabled. After the process is completed, access to the full Web application is restored.

Figure 5-30: Load a cmp File Screen

4.Click the Browse button, navigate to the cmp file and click the button Send File; the cmp file is loaded to the Mediant 2000 and you’re notified as to a successful loading (refer to Figure 5-31).

Figure 5-31: cmp File Successfully Loaded into the Mediant 2000 Notification

5.Note that the four action buttons (Cancel, Reset, Back, and Next) are now activated (following cmp file loading).

You can now choose to either:

Click Reset; the Mediant 2000 resets, utilizing the new cmp you loaded and utilizing the current configuration files.

Version 4.4 79 July 2005