Nortel Networks TP-1610 SIP user manual Dialing Plan Notation

Mediant 2000 SIP User’s Manual				5. Web Management
			Table 5-1: Number Manipulation Parameters
Parameter			Description
Prefix / Suffix to add			• Prefix - Enter the number / string you want to add to the front of the phone
			number. For example, if you enter 9 and the phone number is 1234, the new
			number is 91234.
			• Suffix - Enter the number / string (in brackets) you want to add to the end of the
			phone number. For example, if you enter (00) and the phone number is 1234, the
			new number is 123400.
			Note: You can enter a prefix and a suffix in the same field (e.g., 9(00)).
Number of digits to leave			Enter the number of digits that you want to leave from the right.
Note: The manipulation rules are executed in the following order:
1.	Num of stripped digits
2.	Number of digits to leave
3.	Prefix / suffix to add
Figure 5-4on the previous page exemplifies the use of these manipulation rules in the ‘Source Phone Number
Manipulation Table for Tel		IP Calls’:
• When destination number equals 035000 and source number equals 20155, the source number is changed to
	97220155.
• When source number equals 1001876, it is changed to 587623.
• Source number 1234510012001 is changed to 20018.
• Source number 3122 is changed to 2312.
NPI			Select the Number Plan assigned to this entry.
			You can select Unknown [0], Private [9] or E.164 Public [1].
			The default is Unknown.
			For a detailed list of the available NPI/TON values, refer to Section 5.8.3.2 on page
			48.
TON			Select the Number Type assigned to this entry.
			• If you selected Unknown as the Number Plan, you can select Unknown [0].
			• If you selected Private as the Number Plan, you can select Unknown [0], Level 2
			Regional [1], Level 1 Regional [2], PSTN Specific [3] or Level 0 Regional (Local)
			[4].
			• If you selected E.164 Public as the Number Plan, you can select Unknown [0],
			International [1], National [2], Network Specific [3], Subscriber [4] or Abbreviated
			[6].
			The default is Unknown.
Presentation			Select ‘Allowed’ to send Caller ID information when a call is made using these
			destination / source prefixes.
			Select ‘Restricted’ if you want to restrict Caller ID information for these prefixes.

5.8.3.1Dialing Plan Notation

The dialing plan notation applies, in addition to the four Manipulation tables, also to Tel IP Routing table and to IP Trunk Group Routing table.

When entering a number in the destination and source ‘Prefix’ columns, you can create an entry that represents multiple numbers using the following notation:

•[n-m] represents a range of numbers

•[n,m] represents multiple numbers. Note that this notation only supports single digit numbers.

•x represents any single digit

•# (that terminates the number) represents the end of a number

•A single asterisk (*) represents any number

For example:

•[5551200-5551300]# represents all numbers from 5551200 to 5551300

Version 4.4 47 July 2005