Nortel Networks TP-1610 SIP user manual Snmp Parameters

Mediant 2000 SIP

6.7SNMP Parameters

Note: In Table 6-2, parameters in brackets are the format in the Embedded Web Server *.

Table 6-2: SNMP Parameter (continues on pages 98 to 99)

ini File Field Name	Valid Range and Description
Web Parameter Name*
DisableSNMP	0 = SNMP is enabled (default).
[Enable SNMP]	1 = SNMP is disabled and no traps are sent.
SNMPPort	The device’s local UDP port used for SNMP Get/Set commands.
	The range is 100 to 3999.
	The default port is 161.
SNMPTrustedMGR_x	Up to five IP addresses of remote trusted SNMP managers from which the
	SNMP agent accepts and processes get and set requests.
	Note 1: If no values are assigned to these parameters any manager can
	access the device.
	Note 2: Trusted managers can work with all community strings.
SNMP Trap Parameters
SNMPManagerTableIP_x	Up to five IP addresses of remote hosts that are used as SNMP Managers. The
[SNMP Managers Table]	device sends SNMP traps to these IP addresses.
	Enter the IP address in dotted format notation, for example 108.10.1.255.
	Note: The first entry (out of the five) replaces the obsolete parameter
	SNMPManagerIP.
SNMPManagerTrapPort_x	Up to five parameters used to define the Port numbers of the remote SNMP
[SNMP Managers Table]	Managers. The device sends SNMP traps to these ports.
	Note: The first entry (out of the five) replaces the obsolete parameter
	SNMPTrapPort.
	The default SNMP trap port is 162
	The SNMP trap port must be between 100 to 4000.
SNMPManagerIsUsed_x	Up to five parameters, each determines the validity of the parameters (IP
[SNMP Managers Table]	address and port number) of the corresponding SNMP Manager used to
	receive SNMP traps.
	0 = Disabled (default)
	1 = Enabled
SNMPManagerTrapSendingEnable_x	Up to five parameters, each determines the activation/deactivation of sending
[SNMP Managers Table]	traps to the corresponding SNMP Manager.
	0 = Sending is disabled
	1 = Sending is enabled (default)
SNMPManagerIP	IP address (in dotted format notation) for the computer that is used as the first
Note: Obsolete parameter, use	SNMP Manager. The SNMP Manager is a device that is used for receiving
	SNMP Traps.
SNMPManagerTableIP_x instead.	Note 1: To enable the device to send SNMP Traps, set the ini file parameter
	SNMPManagerIsUsed to 1.
	Note 2: If you want to use more than one SNMP manger, ignore this parameter
	and use the parameters ‘SNMPManagerTableIP_x’ instead.
SNMP Community String Parameters
SNMPReadOnlyCommunityString_x	Read-only community string (up to 19 chars).
	The default string is “public”.
SNMPReadWriteCommunityString_x	Read-write community string (up to 19 chars).
	The default string is “private”.
SNMPTrapCommunityString_x	Community string used in traps (up to 19 chars).
	The default string is “trapuser”.
Mediant 2000 SIP User’s Manual	98	Document #: LTRT-72504