Nortel Networks TP-1610 SIP user manual Figure H-1 Software Upgrade Key Screen

Mediant 2000 SIP

H.3.1 Loading the Software Upgrade Key Using the Embedded Web Server

To load a Software Upgrade Key using the Web Server, take these 5 steps:

1.Access the devices Embedded Web Server (refer to Section 5.5 on page 40).

2.Click the Software Update button.

3.Click the Software Upgrade Key tab; the Software Upgrade Key screen is displayed (shown in Figure H-1).

4.When loading a single key S/N line to a device:

Open the Software Upgrade Key file (it should open in Notepad), select and copy the key string of the device’s S/N and paste it into the Web field New Key. If the string is sent in the body of an email, copy and paste it from there. Press the Add Key button.

When loading a Software Upgrade Key text file containing multiple S/N lines to a device (refer to Figure H-2):

Click the Browse button in the Send “Upgrade Key” file from your computer to the device field, and navigate to the Software Upgrade Key text file.

Click the Send File button.

The new key is loaded to the device, validated and if valid is burned to memory. The new key is displayed in the Current Key field.

Validate the new key by scrolling through the ‘Key features:’ panel and verifying the presence / absence of the appropriate features.

5.After verifying that the Software Upgrade Key was successfully loaded, reset the device; the new capabilities and resources are active.

Figure H-1: Software Upgrade Key Screen

Mediant 2000 SIP User’s Manual 224 Document #: LTRT-72504