Nortel Networks TP-1610 SIP user manual Tel Profile Settings

Mediant 2000 SIP

Note 2: If not specified, the ptime gets a default value.

Note 3: The ptime specifies the maximum packetization time the gateway can receive.

5.Repeat steps 3 and 4 for the second to fifth coders (optional).

6.Repeat steps 2 to 5 for the second to forth coder groups (optional).

7.Click the Submit button to save your changes.

8.To save the changes so they are available after a power fail, refer to Section 5.12 on page 84.

Note: In the current version, only the ptime of the first coder is sent in the SDP section of the Invite message.

5.8.5.2Tel Profile Settings

Use the Tel Profile Settings screen to define up to four different Tel Profiles. These Profiles are used in the ‘Trunk Group’ table to associate different Profiles to gateway’s B-channels, thereby applying different behavior to different Mediant 2000 B-channels.

To configure the Tel Profile settings, take these 8 steps:

1.Open the ‘Tel Profile Settings’ screen (Protocol Management menu > Profile Definitions submenu > Tel Profile Settings option); the ‘Tel Profile Settings’ screen is displayed.

Figure 5-10: Tel Profile Settings Screen

2.In the ‘Profile ID’ drop-down list, select the Tel Profile you want to edit (up to four Tel Profiles can be configured).

Mediant 2000 SIP User’s Manual 56 Document #: LTRT-72504