Nortel Networks TP-1610 SIP user manual Configuring the Channel Settings, Channel Settings Screen

Mediant 2000 SIP User’s Manual 5. Web Management

5.9.2Configuring the Channel Settings

The Channels Settings screen enables you to set the VoIP gateway channel parameters, such as Input and Output voice gain, Jitter buffer characteristics, Modem, Fax and DTMF transport modes. These parameters are applied to all Mediant 2000 channels.

Note that several Channels Settings parameters can be configured per call using profiles (refer to Section 5.8.5 on page 55).

Note: Channel parameters are changeable on-the-fly. Changes take effect from next call.

To configure the Channel Settings parameters, take these 4 steps:

1.Open the ‘Channel Settings’ screen (Advanced Configuration menu > Channel Settings); the ‘Channel Settings’ screen is displayed.

2.Configure the Channel Settings parameters.

3.Click the Submit button to save your changes.

4.To save the changes so they are available after a power fail, refer to Section 5.12 on page 84.

Figure 5-16: Channel Settings Screen

Note 1: The parameters ‘MF Transport Type’ and the 5 Answer Detector parameters are not applicable to the Mediant 2000.

Note 2: The parameters ‘DTMF Transport Type’ and ‘Fax Transport Mode’ are overridden by the parameters ‘IsDTMFUsed’ and ‘IsFaxUsed’ respectively.

Version 4.4 65 July 2005