Nortel Networks TP-1610 SIP user manual BootP/TFTP Application User Interface

Mediant 2000 SIP User’s Manual B. The BootP/TFTP Configuration Utility

B.7 BootP/TFTP Application User Interface

Figure B-1shows the main application screen for the BootP/TFTP utility.

Figure B-1: Main Screen

Log Window

B.8 Function Buttons on the Main Screen

Pause: Click this button to pause the BootP Tool so that no replies are sent to BootP requests. Click the button again to restart the BootP Tool so that it responds to all BootP requests. The Pause button provides a depressed graphic when the feature is active.

Edit Clients: Click this button to open a new window that enables you to enter configuration information for each supported VoIP gateway. Details on the Clients window are provided in Section B.11 on page 195.

Edit Templates: Click this button to open a new window that enables you to create or edit standard templates. These templates can be used when configuring new clients that share most of the same settings. Details on the Templates window are provided in Section B.12 on page 199.

Clear Log: Click this button to clear all entries from the Log Window portion of the main application screen. Details on the log window are provided in Section B.9 on page 192.

Filter Clients: Click this button to prevent the BootP Tool from logging BootP requests received from disabled clients or from clients which do not have entries in the Clients table.

Reset: Click this button to open a new window where you enter an IP address requests for a gateway that you want to reset. Refer to Figure B-2below.

Figure B-2: Reset Screen

Version 4.4 191 July 2005