Nortel Networks TP-1610 SIP Call Counters, IP Connectivity Parameters Column Name Description

Mediant 2000 SIP User’s Manual			5. Web Management
		Table 5-8: IP Connectivity Parameters
Column Name	Description
Quality Info.	Displays QoS information: delay and packet loss, calculated according to previous calls.
	Note 1: This field is applicable only if the parameter ‘AltRoutingTel2IPMode’ is set to 2 or 3.
	Note 2: This field is reset if no QoS information is received for 2 minutes.
DNS Status	Can be one of the following:
	•	DNS Disable
	•	DNS Resolved
	•	DNS Unresolved

5.10.1.2 Call Counters

The Call Counters screens provide you with statistic information on incoming (IP Tel) and outgoing (Tel IP) calls. The statistic information is updated according to the release reason that is received after a call is terminated (during the same time as the end-of-call CDR message is sent). The release reason can be viewed in the Termination Reason field in the CDR message.

For detailed information on each counter, refer to Table 5-9on page 73.

You can reset this information by clicking the Reset Counters button.

To view the IP Tel and Tel IP Call Counters information:

•Open the Call Counters screen you want to view (Status & Diagnostics menu > Gateway

Statistics submenu); the relevant Call Counters screen is displayed. Figure 5-23shows the ‘Tel IP Call Counters’ screen.

Figure 5-23: Tel IP Call Counters Screen

Table 5-9: Call Counters Description (continues on pages 73 to 74)

Counter	Description
	This counter indicates the number of attempted calls.
Number of Attempted	It is composed of established and failed calls. The number of established calls is
	represented by the ‘Number of Established Calls’ counter. The number of failed
Calls
	calls is represented by the five failed-call counters. Only one of the established /
	failed call counters is incremented every time.

Version 4.4 73 July 2005