PROGRAMMED PLAY
Up to 20 tracks can be programmed for playback in any desired order.
1.Ensure CD is in the stop mode.
2.Press the PROG/MEM button, "PROG" and "00" will show in the display and flash.
3.Using the SKIP buttons >>I or I<< select the first track to be memorized.
4.Press the PROG/MEM button. This track is now placed in the memory.
5.Repeat the above process up to a maximum of 20 tracks. If more than 20 tracks are entered, "PROG" and " - - " will flash in the display to indicate the program is full and no further tracks should be entered.
6.To play the programmed selection, press the PLAY/PAUSE button.
7.To cancel Programmed play and resume normal playback, press the STOP button at program mode.
8.The selected programmed track is deleted from the program when either the CD lid is opened or another function is selected Tape, Radio etc.
9.This function can also be used when making a recording from CD.
10.To recall the programmed selection (providing the CD door has not been opened or another function selected) press PROG/MEM button twice.
CARE AND MAINTENANCE (CD PLAYER)
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to contact with the shiny, unprinted side of the disc.
Do not attach adhesive tape, stickers etc., to the disc label.
Clean the disc periodically with soft,
If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched). When cleaning the disc, wipe in straight lines from the centre of the disc to the edge of the disc. Never wipe in circular motions.
To remove a disc from its storage case, press down on the centre of the case and lift the disc out, holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth. Unlike conventional records. compact disc has no groove to collect dust and microscopic debris, so gently wiping with a soft cloth should remove most particles.
SPECIFICATION
POWER SUPPLY | RECORDING SYSTEM |
| ||
AC: | AC240V ~ 50Hz | Recording System: | DC Bias | |
Batteries: | DC 9V | Erasing System: | Magnet Erase | |
| 6 x R14 or equivalent | GENERAL |
|
|
|
|
|
| |
RADIO FREQUENCY COVERAGE | Speaker: | 8 | Ohms | |
FM: | 88 - 108MHz | CD PLAYER |
|
|
AM (MW): | 530 - 1600KHz | Pick Up: | ||
|
| Encoding: | 1 | Bit DA Convertor |
|
| 8 | Time Oversampling | |
6
