Motion FWS-001 Symbol description, Product safety information, Setup precautions, Specifications

This document contains regulatory, precautionary, and recycling information for the Motion FWS-001 Tablet PC. To avoid injury, read this document and understand its contents before you use the Tablet PC. Keep this document nearby, so you can refer to it later.

For detailed operating instructions and safety information, see www.motioncomputing.com/docs

The Motion Tablet PC model FWS-001 is marketed and/or known as the CL900.

Note: The Motion Tablet PC model FWS-001 is compliant to the IEC/EN 60950-1:2006+A11:2009 Safety Standard for Information Technology Equipment.

Symbol description

The following symbols may appear on the products or accessories.

Federal Communications

Commission

Compliance with Nemko CCL for general product safety in accordance with UL 60950-1 (ITE) and CAN/CSA C22.2 No. 60950-1 (ITE)

Canada Interference-Causing

Canada ICES-003,Class B Equipment Standard #3 Class

B devices

Compliance with R&TTE Directive 1999/5/EC for radio frequency devices

Conformité Européne; compliance to EMC and Low Voltage Directives of the European Union

Product complies with 2002/ 96/EC

Compliance with the

Independent Communications

Authority of South Africa

Compliance with Australian and New Zealand EMC, EMR, Radio communication, and Telecommunication Standards (A-Tick symbol)

Compliance with the Korea

Certification Commission for

EMC, Safety, and

Telecommunications

Infocomm Development

	Authority for Singapore
	Normalizacion Y Certification
	Electronica A.C. (NYCE)
	Instituto Argentino de
	Normalización y Certificación
	(IRAM)
	Agência Nacional de
	Telecomunicações (ANATEL)
Specifications
	On	Off (Storage)
Temperature	5–45° C	-20–60° C
	0–45° C (with SSD
	option)
Humidity	8–90% RH	5–95% RH
Air pressure	697–1060 hPa	187–1060 hPa
Power supply	Input: 1.5 A, 100–240 VAC, 47–63 Hz
(ITE) Delta	Output: 19 V DC, 3.42 A
Electronics,	The power supply is compliant with
SADP-65NB	UL 60950-1, CAN/CSA C22.2
Rev. BB	No. 60950-1, and IEC/EN 60950-1

Product safety information

Motion Tablet PCs are designed to optimize safety, minimize strain, and withstand the rigors of portability. However, to further reduce the risk of injury or damage to the unit, you should observe certain precautions.

Mounting and installation disclaimer

Motion Computing shall not be liable under any theory of liability (including, without limitation, contract, tort or statutory law) for any loss, damage, personal injury, or other damage of any nature (including, without limitation, direct, special, incidental or consequential damages) arising directly or indirectly as a result of improper or inappropriate placement, installation, or use of its products or any other application. To safely install and use Motion products, full consideration of occupants, systems (e.g., the location of fuel lines, navigation systems, brakes lines, electrical, drive train or other systems), air-bags and other back-up, warning or safety equipment is required. Without limiting the foregoing, Motion specifically disclaims any responsibility for the placement, use, or installation of its products not consistent with (i) the original manufacturer’s or governmental or regulatory specifications and recommendations for the environment where the products will be placed, used, or installed, (ii) Motion written product instruction sheets, or (iii) workmanship standards.

Setup precautions

•Read the installation instructions before connecting the Tablet PC to the power supply.

2