Nortel Networks TP-1610 SIP user manual Creating a Loadable Prerecorded Tones File

Mediant 2000 SIP

G.1.4 Creating a Loadable Prerecorded Tones File

For detailed information on the PRT file, refer to Section 7.2 on page 137.

To create a loadable PRT dat file from your raw data files, take these 7 steps:

1.Prepare the prerecorded tones (raw data PCM or L8) files you want to combine into a single dat file using standard recording utilities.

2.Execute the TrunkPack Downloadable Conversion utility, DConvert240.exe (supplied with the software package); the utility’s main screen opens (shown in Figure G-1).

3.Click the Process Prerecorded Tones File(s) button; the Prerecorded Tones File(s) screen, shown in Figure G-3, opens.

Figure G-6: Prerecorded Tones Screen

4.To add the prerecorded tone files (you created in Step 1) to the ‘Prerecorded Tones’ screen follow one of these procedures:

Select the files and drag them to the ‘Prerecorded Tones’ screen.

Mediant 2000 SIP User’s Manual 218 Document #: LTRT-72504