Schneider Electric 890USE17700 manual Installing the STB XMP 4440 Optional Removable Memory Card

Configuring the Island Bus

Installing the STB XMP 4440 Optional Removable Memory Card

Introduction	The STB XMP 4440 removable memory card is a 32-kbyte subscriber identification
	module (SIM) that lets you store (See Saving Configuration Data, p. 163), distribute,
	and reuse custom island bus configurations. If the island is in unprotected (edit)
	mode (See Protection Feature, p. 164) and a removable memory card containing a
	valid island bus configuration is inserted in the NIM, the configuration data on the
	card overwrites the configuration data in Flash memory, and is adopted when the
	island starts up. If the island is in protected mode, the island ignores the presence
	of a removable memory card.
	The removable memory card is an optional Advantys STB feature.
	Note: Network configuration data, such as the fieldbus baud setting cannot be
	saved to the card.
Physical	The card measures 25.1 mm (0.99 in) wide x 15 mm (0.59 in) high x 0.76 mm
Description	(0.30 in) thick. It is shipped as a punch-out on a credit-card-sized plastic card, which
	measures 85.6 mm (3.37 in) wide x 53.98 mm (2.13 in) high.
	Note: Keep the card free of contaminants and dirt.
		CAUTION
		LOSS OF CONFIGURATION—MEMORY CARD DAMAGE OR
		CONTAMINATION

The card’s performance can be degraded by dirt or grease on its circuitry. Contamination or damage may create an invalid configuration.

Use care when handling the card.

Inspect for contamination, physical damage, and scratches before

￿installing the card in the NIM drawer.

If the card does get dirty, clean it with a soft dry cloth.

Failure to follow this precaution can result in injury or equipment damage.

50 890USE17700 April 2004