Schneider Electric 890USE17700 Assigning a Configured IP Address to the STB NIP, Reboot Option, p

STB NIP 2212 Web Server

Assigning a

Configured

IP Address to the STB NIP 2212

Use the following procedure to configure an IP address for the STB NIP 2212. Note: Your STB NIP 2212 cannot have a role name.

Step	Action	Comment
1	Set the lower rotary switch to an INTERNAL
	position (See Physical Description, p. 28),
	and power cycle the STB NIP 2212.
2	If your STB NIP 2212, has a role name, you	If no role name is assigned, skip
	must remove it using the Role Name web	step 2.
	page (See Configuring a Role Name, p. 82).
3	Open the STB NIP 2212 web site.
4	Click on the Configuration tab to display the
	Configuration menu.
5	Select the Configured IP option.
6	In the IP address field, type the IP address
	that you want to use in dotted decimal
	format.
7	Click on the Save button to save the address	If the address is valid, it will appear in
	to Flash memory and in RAM.	the banner at the top of each
		STB NIP 2212 web page.
		Note: The LAN ST LED (See
		Ethernet Communications LEDs,
		p. 31) on the NIM blinks four times if
		the IP address is a duplicate.
8	Click on the Configuration tab to return to the
	Configuration menu.
9	Select the Reboot option (See About the
	Reboot Option, p. 76).
10	At the Reboot now? prompt, click on the OK
	button.
11	Click on the OK button at the confirmation	Your STB NIP 2212 restarts. The
	prompt, "Are you sure?"	IP address that you set up on the web
		is the active IP address for the island.

74 890USE17700 April 2004