Schneider Electric 890USE17700 Feature Function, An RJ-45 See STB NIP 2212 Network Interface, p

The STB NIP 2212 NIM

The physical features of the STB NIP 2212 are described briefly in the following table:

Feature		Function
1	Ethernet interface	An RJ-45 (See STB NIP 2212 Network Interface, p. 26)
		connector is used to connect the NIM and the island bus to
		an Ethernet LAN network.
2	MAC ID	48-bit, unique network ID hard-coded in the STB NIP 2212
		when manufactured.
3	upper rotary switch	The rotary switches (See Physical Description, p. 28) used
		together specify a role name for the STB NIP 2212.
4	lower rotary switch
		Alternatively, the lower rotary switch can be used to direct the
		STB NIP 2212 to use its MAC-based default IP address (See
		Summary of Valid IP Address Settings, p. 29) or to obtain its
		IP parameters from a BootP server or from the
		STB NIP 2212 web site (See About the Embedded Web
		Server, p. 67).
5	space provided to record	Write the IP address that you assign to this STB NIP 2212
	IP address	here.
6	power supply interface	A two-pin connector used to connect an external 24 VDC
		power supply (See Selecting a Source Power Supply for the
		Island’s Logic Power Bus, p. 39) to the NIM.
7	LED array	Colored LEDs (See LED Indicators, p. 30) use various
		patterns to visually indicate the operational status of the
		island bus, activity on the NIM, and the status of
		communications to the island over the Ethernet LAN.
8	removable memory card	A plastic drawer in which a removable memory card (See
	drawer	Installing the STB XMP 4440 Optional Removable Memory
		Card, p. 50) can be seated and then inserted into the NIM.
9	CFG port cover	A hinged flap on the NIM’s front panel that covers the CFG
		interface (See The CFG Interface, p. 33) and the RST button
		(See The RST Button, p. 55).

890USE17700 April 2004 25