Schneider Electric 890USE17700 manual Statistics, Issued, and the statistics are retrieved

Data Exchange

Ethernet	Ethernet statistics comprise status information and errors related to data
Statistics	transmissions to and from the STB NIP 2212 over the Ethernet LAN.
	Ethernet statistics are held in a buffer until the get Ethernet statistics command is
	issued, and the statistics are retrieved.
	The clear Ethernet statistics command clears all of the statistics currently held in
	the buffer except the MAC address and the IP address.
	The following table lists the Ethernet statistics used by the Advantys STB system:
	Word No. in Buffer	Description	Comment
	00–02	MAC address	cannot be cleared
	03	board status
	04–05	rx interrupt
	06–07	tx interrupt
	08	jabber failure count
	09	total collisions
	10–11	rx missed packet errors
	12–13	memory errors in state RAM
	14–15	chip restart count
	16–17	framing errors
	18–19	overflow errors
	20–21	CRC errors
	24–25	rx buffer errors
	26–27	tx buffer errors
	28–29	silo underflow
	30–31	late collision
	32–33	lost carrier
	34–35	collision tx failure
	36–37	IP address	cannot be cleared
	38–53	reserved	always 0

136 890USE17700 April 2004