Schneider Electric 890USE17700 manual Introduction Fields on the Configure Snmp Web, Stb Nip

STB NIP 2212 Web Server

Configure SNMP Web Page

Introduction

Fields on the Configure SNMP Web Page

The Configure SNMP web page allows you to view the parameters used by the SNMP agent contained in the STB NIP 2212.

The parameters and the settings for the SNMP agent are described in the following table:

Purpose	Field Name	Description
Agent	Location	100-character, case-sensitive alphanumeric string describing
		the location of this STB NIP 2212 (agent device).
	Contact	100-character, case-sensitive alphanumeric string identifying the
		contact person for this STB NIP 2212.
Community	Set	100-character, case-sensitive alphanumeric community string
		used to wite the value of a point of information. A SetRequest is
		used by an SNMP manager to write to the STB NIP 2212.
		The default community name for the STB NIP 2212 is public.
		Note: If you enable an Authentication Failure Trap, assign a
		private community string for SetRequest.
	Get	100-character, case-sensitive alphanumeric community string,
		assigned by the user and used by the master to read the value
		of a point of information provided by the STB NIP 2212.
		The default community name for the STB NIP 2212 is public.
		Note: If you enable an Authentication Failure Trap, assign a
		private community string for a Get Request.
		If you do not assign a private community string for this field, any
		SNMP manager can read the MIB objects for your
		STB NIP 2212.
	Trap	A trap is an exception report from an agent notifying the SNMP
		manager of an event or parameter change.
		Used by SNMP managers listening for traps to determine with
		which community the trap is associated.
		If a network device has a configurable SNMP manger, the
		manger can be set up to receive specific traps based on the
		community string.
Security	Trap	Authentication failure trap. Schneider Electric recommends that
	Enabled	you always enable the trap.

890USE17700 April 2004 105