Schneider Electric 890USE17700 manual Fields on the Master Configurator Web Page

STB NIP 2212 Web Server

Fields on the Master Configurator Web Page

The fields on the Master Configurator web page are described in the following table:

Field	Legal Values	Description
Protocol	IP	The IP address (See How the STB NIP 2212 Obtains
		IP Parameters, p. 60) of the master configurator on the
		Ethernet LAN.
	serial	The master configurator is attached to the CFG port on the
		STB NIP 2212.
	disabled	Disabled is the default setting for this feature.
		If selected, the master configurator feature is disabled.
		However, devices normally capable of configuring the island
		will perform as designed.
reservation	0 ... 120000 ms,	The amount of time in ms allocated to a master for writing
time	with a 1 ms	configuration data to the STB NIP 2212. Other masters
	resolution time	attempting to configure the island during this time will receive
		an error message.
		The default reservation time is 60,000 ms (1 min).
		Reservation time is self-renewing.

Configuring a Master Configurator for the Island

Use the following procedure to configure a master configurator for an Advantys STB island:

Step	Action
1	Click on the Configuration tab to display the Configuration menu.
2	Select the Master Configurator option.
3	To￿identify the master configurator, do one of the following:
	Click on the radio button next to the IP option and type in the IP address for
	the master configurator communicating via the fieldbus (Ethernet) port (See
	STB NIP 2212 Network Interface, p. 26), e.g., 139.158.2.38 (See Sample
	Master Configurator Web Page, p. 81).
	For a master configurator attached to the STB NIP 2212’s CFG port (See
	￿The CFG Interface, p. 33), click on the radio button next to the Serial option.
	To disable this feature, click on the radio button next to the Disabled (default)
	option.
4	Type a value for the reservation time (0 ... 120000 ms). This is the amount of
	time allocated to the master configurator for writing configuration data to the
	island. The default setting is 60000 ms (1 min).
5	Click on the Save button to store the information about the master configurator
	in the STB NIP 2212’s Flash memory and in RAM.

80 890USE17700 April 2004