Overwritten, Data are ignored | Schneider Electric 890USE17700

Configuring the Island Bus

Using the STB XMP 4440 Optional Removable Memory Card to Configure the Island Bus

Introduction	A removable memory card is read when an island is powered on. If the configuration
	data on the card is valid, the current configuration data in Flash memory is
	overwritten.
	A removable memory card can be active only if an island is in edit mode. If an island
	is in protected mode (See Protecting Configuration Data, p. 164), the card and its
	data are ignored.

Configuration The following discussion describes several island configuration scenarios that use

Scenarios the removable memory card. The scenarios assume that a removable memory card is already installed in the NIM:

initial island bus configuration

replace the current configuration data in Flash memory in order to:

apply custom configuration data to your island

temporarily implement an alternative configuration; for example, to replace an

island configuration used daily with one used to fulfill a special order copying configuration data from one NIM to another, including from a failed NIM

to its replacement; the NIMs must run the same fieldbus protocol configuring multiple islands with the same configuration data

Note: Whereas writing configuration data from the removable memory card to the NIM does not require use of the optional Advantys configuration software, you must use this software to save (write) configuration data to the removable memory card in the first place.

Edit Mode	Your island bus must be in edit mode to be configured. In edit mode, the island bus
	can be written to as well as monitored.
	Edit mode is the default operational mode for the Advantys STB island:
	A new island is in edit mode.
	Edit mode is the default mode for a configuration downloaded from the Advantys
	configuration software to the configuration memory area in the NIM.

890USE17700 April 2004

890USE17700 specifications

Schneider Electric has long been recognized as a leader in energy management and automation solutions, and one of its innovative offerings is the Schneider Electric 890USE17700. This product is part of the company's comprehensive portfolio aimed at enhancing energy efficiency and operational performance across various sectors.

The 890USE17700 is primarily designed for use in industrial applications, serving as an advanced device that can significantly contribute to smarter energy usage. One of its main features is its ability to optimize energy consumption through intelligent control systems. This is achieved through real-time monitoring and analysis, allowing users to identify inefficiencies and implement corrective actions swiftly.

Equipped with state-of-the-art technology, the 890USE17700 incorporates Schneider Electric's EcoStruxure™ platform, which leverages the Industrial Internet of Things (IIoT) principles. This platform allows for seamless connectivity of devices and systems, enabling users to collect valuable data that can drive decision-making processes. Moreover, the real-time analytics provided by this technology ensure that organizations can respond promptly to changing operational conditions.

Safety and reliability are other key characteristics of the 890USE17700. The device is built with robust safety features that comply with international standards, ensuring protection against electrical faults and other potential hazards. This not only enhances the operational reliability of industrial systems but also supports compliance with regulatory requirements.

The 890USE17700 also offers flexibility in deployment, allowing it to integrate with existing systems and infrastructure without significant modifications. Its user-friendly interface simplifies setup and programming, making it accessible for various levels of technical expertise. This ease of use encourages widespread adoption across diverse industrial environments.

In summary, the Schneider Electric 890USE17700 stands out as a premier solution for organizations aiming to enhance their energy efficiency and operational performance. Its integration with the EcoStruxure platform, focus on safety, and flexibility make it a compelling choice for modern industrial applications. As industries continue to evolve towards smarter and more sustainable practices, the 890USE17700 is poised to play a crucial role in this transformation.

Schneider Electric 890USE17700 manual Overwritten, Data are ignored, Edit Mode

Models: 890USE17700

Introduction

overwritten.

data are ignored.

Edit Mode

can be written to as well as monitored.

A new island is in edit mode.

890USE17700 April 2004

890USE17700 specifications

Introduction

overwritten.

data are ignored.

Edit Mode

can be written to as well as monitored.

￿A new island is in edit mode.

890USE17700 April 2004

890USE17700 specifications

A new island is in edit mode.