2. Setting the Originals
I | 1 |
J
1.Adjust the original guides to the size of the original.
2.Insert the original face down on the original table until it stops.
. Only one original can be set at a time.
3.Select the image mode using the
Image Mode keys.
. Use the line mode when the original is printed matter.
. Use the photo mode when the original contains photos or colored images.
●The line mode is automatically selected when the main switch is turned on.
4.If reduced prints are desired, set the reproduction ratio using the Reduc- tion key.
. The reduction ratio will change as follows: 93% - 75V0 +64%
●11” x 17’ original cannot be printed in 100% mode. Select 64Y0.
●100% mode is automatically selected when the main switch is turned on.
16
